Ok, I understand. Here's my blog post about my Flex Ice Carpet Cleaner project, mimicking the style you described:

## Flex Ice Carpet Cleaner – My DIY Journey

Alright folks, so I'm gonna spill the beans on this little project I tackled last week. It all started when my dog decided the living room rug was his personal toilet... again. I was staring down a hefty professional cleaning bill, and I thought, "Nah, I can figure this out myself." Thus began my quest for a DIY carpet cleaner.

First thing's first, I grabbed a bunch of stuff from the local hardware store. I'm talking PVC pipes, connectors, a small submersible pump (the kind you use for aquariums), some flexible tubing, and a spray nozzle. I also snagged a cheap plastic container to act as the dirty water tank. Don't forget the essentials like PVC cement and a drill!

Next, the fun part – assembling this Frankenstein monster. I basically envisioned a small, mobile extraction system. I cut the PVC pipes to size and glued them together to form a frame. The frame was designed to hold the water tank and give me something to push around. Then, I attached the pump inside the water tank, making sure the intake was near the bottom.

Then came the tricky part, connecting the flexible tubing. I ran one tube from the pump outlet to the spray nozzle, which I mounted on the front of the frame. This was my cleaning solution delivery system. Next, I attached another tube to a squeegee-like attachment I fashioned from some spare rubber. This was for sucking up the dirty water. This tube led back into the dirty water tank.

I mixed up a cleaning solution of warm water and some carpet cleaner concentrate. Nothing fancy, just the stuff they sell at the grocery store. I filled the clean water tank and plugged in the pump.

Time to test this baby out! I sprayed the cleaning solution onto the offending area of the rug. The pump worked like a charm! Then, I used the squeegee attachment to suck up the dirty water. To my surprise, it actually worked! It wasn't perfect, but it definitely pulled out a lot of the grime.

I repeated the process a few times, emptying the dirty water tank as needed. The rug was still a little damp, so I cranked up the fans and let it dry overnight.

The next day, I was pleasantly surprised. The stain was gone! The rug smelled fresh, and I'd saved myself a ton of money. Was it as good as a professional cleaning? Probably not. But for a DIY job, I was pretty damn proud of myself.

Lessons Learned:

The pump was a bit underpowered. I probably should have splurged on a slightly stronger one.

The squeegee attachment could use some improvement. Maybe I'll 3D print something more efficient next time.

PVC cement is messy! I got it everywhere.

Overall, this was a fun and rewarding project. It proved that you don't always need fancy equipment to get the job done. Sometimes, a little ingenuity and some elbow grease are all you need. If you're looking for a cheap and effective way to clean your carpets, give this DIY cleaner a try. You might be surprised at what you can accomplish!