Alright folks, gather 'round! Today I'm gonna spill the beans on a little DIY project I tackled last weekend: a water broom for my garden hose. Now, I know what you're thinking: "A water broom? Why bother?" Well, let me tell ya, my patio was lookin' ROUGH. Grime, moss, you name it, it was there. Power washing? Too much hassle. Scrubbing by hand? Ain't nobody got time for that!

So, I figured, why not try to whip somethin' up myself? First things first, I rummaged through my garage. Found an old broom head – the kind with stiff bristles. Perfect! Next, I needed some way to attach it to the hose. After a bit of digging, I unearthed a PVC pipe connector – the kind you use for plumbing. It was just the right size to fit snugly over the broom handle.

Okay, time to get my hands dirty. I used a drill to make a few holes in the PVC connector. These were for the water to spray out. I didn't want just one big jet; I wanted a wider spray pattern, you see. So I made about five or six smaller holes, spread out along the connector.

Then came the tricky part: attaching the connector to the broom. I used some heavy-duty epoxy glue. Slathered it on good and thick, making sure the connector was firmly seated on the broom handle. I let it dry overnight, just to be sure it was rock solid.

The next day, it was showtime! I screwed the garden hose onto the PVC connector. Turned on the water… and BAM! Water sprayed out of all those little holes I'd drilled. It wasn't exactly a high-pressure blast, but it was definitely enough to loosen up the grime on my patio.

I started sweeping, and let me tell you, it worked like a charm! The water helped to lift the dirt, and the stiff bristles scrubbed it away. It was so much easier than scrubbing with a regular brush. Plus, the water rinsed everything clean as I went. No need for a separate rinse cycle!

Now, it wasn't perfect, mind you. The water pressure could've been a little stronger. Maybe next time I'll try using a smaller connector with fewer holes to concentrate the spray. But overall, I was super happy with how it turned out. My patio looks a million times better, and I didn't have to break the bank or spend all day sweating over it.

Here's a quick rundown of the materials I used:

• Old broom head with stiff bristles
• PVC pipe connector (the size will depend on your broom handle)
• Drill
• Epoxy glue
• Garden hose

And here's a quick step-by-step:

• Drill holes in the PVC connector.
• Glue the connector to the broom handle.
• Let it dry overnight.
• Attach your garden hose.
• Start sweeping!

Final Thoughts

So, there you have it! My DIY water broom for garden hose. It's nothin' fancy, but it gets the job done. If you're looking for a cheap and easy way to clean your patio, driveway, or whatever else, give it a try. You might be surprised at how well it works!